We sell the socket system of dolls house lighting which requires no soldering or electrical knowledge. Plan which lights you want to go into each room and remember that our transformer LT33 will run up to 32 bulbs and not 32 lights. The basic set up is a transformer, a multi socket set and the lights of your choice.
Each light has a removable plug on approximately 60cm of wire, unwind the wire from each prong on the plug and pull the wire through the plug, make a hole in the wall and thread the wire through, re-attach the plug to the wire by passing the wire through the plug and winding one of the wires around each of the prongs to make the connection. Attach the socket set to the rear wall of the house and plug each light into the socket set. If you require more lights we sell single sockets, triple sockets, six and twelve socket sets. Which can be plugged into the first socket set to let you attach additional lights.
The spade connectors on the 6 or 12 socket sets attach to the transformer by unscrewing the 2 screws and placing the connectors underneath, then tighten the screws and plug the transformer into your electicity supply
